Main menu:
- Home Page
- Coatings & Industry
- Appearance
- Corrosion + Ageing
- Material properties
- Coatings Mechanical properties
- Coatings Physical properties
- Temperature Oven Monitoring
- Gas Detection
- In-Line Measurement
- Flowmeter
- Surface Tension
- Laboratory Product
- Temperature - Climatic conditions
- Transportation
- Graphic & Printing Industry
- News - Events - Service - Contact
Senze-Instruments
Dip Viscosity Cups
Graphic & Printing Industry > Ink properties > Viscosity
FLOW CUP WITH HANDLE (FRIKMAR TYPE)
Thanks to its handle, this cup is very easy to use and performs quick controls in workshop or during manufacturing processes.
The instrument is first dipped into the product to be measured then emptied through the orifice. The flow time can be converted into cSt.
Several models, from 6 to 2000 cSt.
ASTM - DIN - EN - ISO - NF
Purpose and Application
Rapid determination of the viscosity of any type of fluid, as for instance paint, varnish, wet enamel, photogravure ink, dye and lacquer for leather, oil, fat, foodstuff etc. Particularly suit-able in the workshop.
Measuring Principle
The viscosity of a substance to be determined is expressed as the efflux time of the measured volume (100 ml) out of a cup through an orifice of specified diameter. The efflux time is measured with a stop-watch.
Visco Test Blade Model 301 acc. to Rossmann
Simple consistency test.
The Visco Test Blade is designed for the rapid determination of the viscosity of paints for spray and brush application. On the one hand it is a practical stirring utensil when adding thinner to the paint and, on the other hand, it serves as a device to measure the viscosity of the substance. It is easy to use and to clean, making it a convenient instrument for use in the practice.
The Visco Test Blade is immersed into the test liquid in such a way that the slit is entirely covered, whilst the upper hole remains free. The blade is then lifted quickly out of the liquid, holding it upright, and the time measured until the fluid meniscus in the slit reaches the lower hole. This point is clearly visible since the membrane covering the hole will burst at that moment. The run-off speed in the slit is also influenced by the run-off speed on the remainder of the blade. The immersion depth should therefore be adhered to exactly. Properly wetted the blade prior to the test.
Simple consistency test.
The Visco Test Blade is designed for the rapid determination of the viscosity of paints for spray and brush application. On the one hand it is a practical stirring utensil when adding thinner to the paint and, on the other hand, it serves as a device to measure the viscosity of the substance. It is easy to use and to clean, making it a convenient instrument for use in the practice.
The Visco Test Blade is immersed into the test liquid in such a way that the slit is entirely covered, whilst the upper hole remains free. The blade is then lifted quickly out of the liquid, holding it upright, and the time measured until the fluid meniscus in the slit reaches the lower hole. This point is clearly visible since the membrane covering the hole will burst at that moment. The run-off speed in the slit is also influenced by the run-off speed on the remainder of the blade. The immersion depth should therefore be adhered to exactly. Properly wetted the blade prior to the test.
100.00 €
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Ord.-No. : 101-0062.01.31
Nozzle Dia. : 2 mm
Viscosity Range : 10 - 50 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0062.01.31
Nozzle Dia. : 2 mm
Viscosity Range : 10 - 50 mm˛/s
Material : Aluminium alloy
111.00 €
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Ord.-No. : 101-0062.05.31
Nozzle Dia. : 3 mm
Viscosity Range : 30 - 300 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0062.05.31
Nozzle Dia. : 3 mm
Viscosity Range : 30 - 300 mm˛/s
Material : Aluminium alloy
111.00 €
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Ord.-No. : 101-0062.02.31
Nozzle Dia. : 4 mm
Viscosity Range : 50 - 800 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0062.02.31
Nozzle Dia. : 4 mm
Viscosity Range : 50 - 800 mm˛/s
Material : Aluminium alloy
111.00 €
Model 321 (DIN Dip Viscosity Cup - technically equivalent to DIN 53 211)
Ord.-No. : 101-0062.03.31
Nozzle Dia. : 6 mm
Viscosity Range : 300 - 1,500 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0062.03.31
Nozzle Dia. : 6 mm
Viscosity Range : 300 - 1,500 mm˛/s
Material : Aluminium alloy
111.00 €
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Ord.-No. : 101-0165.01.31
Nozzle Dia. : 3 mm
Viscosity Range : 10 - 40 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0165.01.31
Nozzle Dia. : 3 mm
Viscosity Range : 10 - 40 mm˛/s
Material : Aluminium alloy
129.00 €
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Ord.-No. : 101-0165.02.31
Nozzle Dia. : 4 mm
Viscosity Range : 35 - 135 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0165.02.31
Nozzle Dia. : 4 mm
Viscosity Range : 35 - 135 mm˛/s
Material : Aluminium alloy
129.00 €
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Ord.-No. : 101-0165.03.31
Nozzle Dia. : 5 mm
Viscosity Range : 90 - 330 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0165.03.31
Nozzle Dia. : 5 mm
Viscosity Range : 90 - 330 mm˛/s
Material : Aluminium alloy
129.00 €
Dip Flow Cup 322 technically equivalent to DIN ISO 2431
Ord.-No. : 101-0165.04.31
Nozzle Dia. : 6 mm
Viscosity Range : 190 - 680 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0165.04.31
Nozzle Dia. : 6 mm
Viscosity Range : 190 - 680 mm˛/s
Material : Aluminium alloy
129.00 €
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Ord.-No. : 101-0049.01.32
Nozzle Dia. : No. 1 (0.078")
Viscosity Range : 5 - 60 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0049.01.32
Nozzle Dia. : No. 1 (0.078")
Viscosity Range : 5 - 60 mm˛/s
Material : Aluminium alloy
138.00 €
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Ord.-No. : 101-0049.02.32
Nozzle Dia. : No. 2 (0.108")
Viscosity Range : 20 - 250 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0049.02.32
Nozzle Dia. : No. 2 (0.108")
Viscosity Range : 20 - 250 mm˛/s
Material : Aluminium alloy
138.00 €
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Ord.-No. : 101-0049.03.32
Nozzle Dia. : No. 3 (0.148")
Viscosity Range : 100 - 800 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0049.03.32
Nozzle Dia. : No. 3 (0.148")
Viscosity Range : 100 - 800 mm˛/s
Material : Aluminium alloy
138.00 €
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Ord.-No. : 101-0049.04.32
Nozzle Dia. : No. 4 (0.168")
Viscosity Range : 200 - 1,200 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0049.04.32
Nozzle Dia. : No. 4 (0.168")
Viscosity Range : 200 - 1,200 mm˛/s
Material : Aluminium alloy
138.00 €
Model 343 (Zahn Dip Viscosity Cup - in accordance with ASTM D 4212)
Ord.-No. : 101-0049.05.32
Nozzle Dia. : No. 5 (0.207")
Viscosity Range : 400 - 1,800 mm˛/s
Material : Aluminium alloy
Ord.-No. : 101-0049.05.32
Nozzle Dia. : No. 5 (0.207")
Viscosity Range : 400 - 1,800 mm˛/s
Material : Aluminium alloy
138.00 €
Zahn Flow Cup complete set of 5 cups
Ord.-No. :101-0030.01.31
complete with 5 exchangeable cups of orifice diameter No. 1 (0.078"), No. 2 (0.108"), No. 3 (0.148"), No. 4 (0.168") and No. 5 (0.207"), including carrying case
Ord.-No. :101-0030.01.31
complete with 5 exchangeable cups of orifice diameter No. 1 (0.078"), No. 2 (0.108"), No. 3 (0.148"), No. 4 (0.168") and No. 5 (0.207"), including carrying case
592.00 €
Digital Stop Watch with certificate of the Eichamt (Calibration Office)
Ord.-No. : 101-56 0911241
Ord.-No. : 101-56 0911241
206.00 €