Senze-Instruments

Specialising for over 50 years in the measurement of viscosity, rheology and texture analysis, Lamy Rheology has seen the scope of its business gradually expand over the years.
Initially, the exclusive distributor of the Contraves brand until 1991, then of Mettler-Toledo and Rheometric Scientific, Lamy then started to design its own instruments to complement those already offered by these firms.
The entire range of Lamy Rheology rotating viscosimeters and rheometers has been developed and is manufactured in France, in our premises located near Lyon.
“Our application laboratory is at your disposal to provide you with efficient advice when next choosing measurement instruments.”

Bayonet coupling
Because simplicity and strength are two essential qualities for a measurement apparatus, all our instruments have been fitted with bayonet couplings for the past 20 years.
State-of-the-art electronics combined with a springless measurement principle, ensures a wide measurement range and excellent reliability, reduces maintenance, and does not require support levelling.

No graduated spring, but a principle of compensation of absorbed power, and a wide torque range make that you only need one instrument for all your products : ‘First’ 0->10 mNm compare to LV =0.0673 mNm, RV =0.7187 mNm, HB =5.7496 mNm.

FIRST RM

The First RM was specifically made for your viscosity measurements according the ASTM/ISO 2555 standard;

It is supplied with a laboratory stativ, one Pt100 sensor, and an ASTM 2 to 7 spindles set and parallel, serial and USB output.

Easy and reliable
His numerical technology, without mechanical torque measuring element, associated to a robust design:
• No spring,
• Bayonet coupling,
• No level adjustment.
These advantages make the first RM very useful and avoid an important frequently and then expensively maintenance.

His modern technology made of him THE NEW REFERENCE for the ASTM standard measurements.

Specifications first RM

• Measuring princip : rotative viscometer with ASTM spindles
• Rotation speed 21 speeds : 0.3-0.5-0.6-1-1.5-2-2.5-3-4-5-6-10-12-20-30-40-
• 50-60-100-200- 250 rpm
• Torque range : 0 to 10 mNm
• Temperature probe included : by Pt100 sensor, from 0 to 120°C
• Digital output : T°C - Speed - Torque- MS - Viscosity -Time
• Viscosity range : 15 - 156 M mPa.s
• Supply voltage : 110-220 VAC
• PC connexion : Serial and USB ports
• Printer connexion : Centronics parallel port

Other detail

• first RM enables to fix time of measurment, for thixotropic samples.
• A printer interval could be added.

first RM is supplied COMPLETE in a case with laboratory stand, voltage supply box, Pt100 sensor and an ASTM / ISO 2555 set of 6 spindles.

RM 100 : Numerical Technology

Internal concept , based on completely numerical technology, and without any mechanical element for torque measurement, garantees a very high precision, a quick answer and an tested reliability. It has a broad backlighted display very readable who gives either the parameters to be defined for measurement, or results of measurement: viscosity in mPas, Pas or UD, and temperature.

Universal rotative Viscosimeter without spring or tossion rod, with integrated calculator and parallel, sérial and USB outputs ;


Available accessories
* MS-DIN 11-22-33
* MS- R 1 to 5 ( TV system )
* MS- BV 1 to 1000
* MS DIN/ISO Thermostating Unit
* MB-2,MB-3 Thermostating Unit
* MB-2,3 Cup-hold Plate
* Rheomatic-A software

It is conformed to all normatives:
ASTM / ISO2555 spindles, DIN / ISO 3219, MS-R, and it read Temperature of sample.
Specifications RM100

• Measuring princip : rotational viscometer
• Rotation speed : 34 speeds: 0.3-0.5-0.6-1-1.5-2-
• 2.5-3-4-5-6-10-12-20-30-40-50-60-
• 100-200-250-300-400-500-600-700-800-
• 900-1000-1100-1200-1300-1400-1500 rpm
• Torque range : 0.05 to 10 mNm
• Temperature probe included : by integrated Pt 100, from -20 to 120°C
• Digital output : T°c, speed or Shear rate, Torque, Viscosity
• Viscosity range : from 1 mPa.s to 510 M mPa.s
• Supply voltage : 110-220 VAC
• PC connexion : Serial or USB port
• Printer connexion : Parallel port

Other detail : Rheomatic-A software enables ASCII data transfer to PC.

PELTIER CONE-PLATE STAND CP100

This stand including a Peltier effect plate, without circulating fluid, is ideal for rheological measurements involving rapid temperature variations or small sample quantities.

Easy to clean. His sturdiness and simplicity give to it an ideal tool in Quality Control of “ICI” type for example.

About viscosities in function of temperature, or fast temperatures changes on a sample, the CP100 tform an efficient and affordable group.

Specifications RM100 + Peltier CP1 stand

• Measuring princip : Speed imposed and Peltier
• 34 speeds:0.3-0.5-0.6-1-1.5-2-2.5-3-4-5-6-10-
• 12-20-30-40-50-60-100-200-250-300-
• 400-500-600-700-800-900-1000-1100-
• 1200-1300-1400-1500 tr/mn
• range 0 to 30 mNm : 5 to 60° C +/- 0.2°C.
• output: All standard parameters.
• range : 5 - 150 000 000 mPa.s according used cone.
• voltage : 110-220 VAC.
• connexion : Serial and USB
• output. connexion : Parrallel output.

This configuration answers to the standard: ASTM D4287, ISO 2884 Industrial control of coatings to
10 000 s-1. "ICI Sandard".