BLUETOOTH & USB - Senze-Instruments Benelux

Senze-Instruments BENELUX
Go to content
Process & Quality Control

BLUETOOTH & USB

Temperature > Cold Chain Monitoring
Tempod 30 - Temperature USB PDF Data Logger
AUTO PDF REPORT WITH EMBEDDED RAW DATA
Automatically generated encrypted PDF format report, no software required to access data file.
PDF report includes recording summaries, statistics, alarm information, graph and optional tabular data.
Embedded raw data allows further data processing via TempSen Cloud and 3rd party system.
SOFTWARE-FREE ONLINE CONFIGURATION
Powered by TempSen patented SFP (Software Free Programming) technology, it's super simple to configure a data logger anywhere, anytime and on any platform, no need to install any software, just connect logger to computer and apply the configuration file downloaded, configuration will be done in one second.
POWERFUL LCD INDICATION
LCD presents following key information of recording task.
  • Alarm Status
  • Running Status
  • Monitoring Statistics
  • Time Mark History
  • Remaining Battery Levels
HEIGHTENED MEASUREMENT ACCURACY
Measurement accuracy heightened to ±0.3°C to present customer more precise reflection of temperature fluctuation.
MOQ : 10 units

OTHER MODELS AVAILABLE
    Technical Features

    • Firmware user upgradable
    • IATA PI970 II compliant, your goods with Tempod inside will not be handled as dangerous goods
    • RTCA DO-160G compliant allows monitoring in air freight
    • GxP regulations compliant

    USB CONNECTOR
    Enables quick connection with PC anytime anywhere, no cable and reader required to download data.
    PASSWORD PROTECTION
    Enable password protection to prevent unauthorized manipulation to device.
    TIME MARK
    Click on Mark button to record a time stamp for events requiring special attention during shipment.
    REPEAT START
    Allows re-start recording with latest configurations by pressing button on device.

    MULTIPLE ALARM RANGES
    Up to 5 alarm ranges offer detailed and precise temperature excursion statistics.
    Technical Specifications

    Usage Type                              Multi-use
    Sensors                                     Temperature: Internal NTC sensor
    Memory Capacity               28800 readings
    Measurement Range        -30°C...70°C
    Accuracy                                  ±0.3°C (-20°C…20°C)
                                                          ±0.5°C (other range)
    Resolution                               0.1°C / °F
    Start                                            ModeManual / Auto / Temperature start
    Logging Interval                   1 minute...2 hours
    Alarm Ranges                         High and low alarm / 5 alarm ranges
    Battery                                       3.0V lithium battery, user replaceable
    Battery Life                              18 months
    Protection Class                   IP65
    Dimensions                             100mm L x 40mm W x 12mm H
    Weight                                       Approx. 48g

    Technical Specifications 2

    DisplayLCD
    •OK(√), Alarm(x), alarm zone
    •Running status
    •Temperature statistics (max, min, avg)
    •Remaining battery level
    •Mark history
    Automatic Data File         Encrypted PDF report with embedded raw data
    Software                                 TempCentre Data Management Software
    Compatible OS                    Windows 7 / 8 / 10
    Calibration                             Factory NIST traceable 3-point calibration
    Certifications                       CE,
                                                         FCC,  
                                                         EN12830,
                                                         RTCA-DO160G,
                                                         IATA PI970 II,  
                                                         RoHS, WEEE
    Button                                      Start / Stop / View / Mark
    Connection                            USB
    Tempod 20B bluetooth

    TEMPOD® BLUETOOTH® DATA LOGGERS
    Bluetooth® Access
    Access, control and download data logger outside of package or vehicle through Bluetooth® Low Energy (BLE) connection.
    Auto PDF Report With Embedded Raw Data
    Automatically generated encrypted PDF format report, no software required to access data file. PDF report includes recording summaries, statistics, alarm information, graph and optional tabular data. Embedded raw data allows further data processing via TempSen Cloud and 3rd party system.
    Built-in USB Connector
    Enables quick connection with PC anytime anywhere, no cable and reader required to download data.
    Flight Mode
    Logger keeps recording with Bluetooth® wireless turned off under Flight Mode, and user could awake logger up from xflight mode remotely using TempSen Go App on smart device.
    Password Protection
    Enable password protection to prevent unauthorized manipulation to device.

    MOQ : 10 units

    OTHER MODELS AVAILABLE
    Technical features

    • Firmware user upgradable
    • IATA PI970 II compliant, your goods with Tempod inside will not be handled as dangerous goods
    • RTCA DO-160G compliant allows monitoring in air freight
    • GxP regulations compliant
    Technical Spectifications 1

    Usage Type                            Multi-use
    SensorsTemperature:      Internal NTC
    Memory Capacity              28800 readings
    Measurement Range       -20°C...70°C
    Accuracy                                  ±0.3°C (-20°C…20°C),
                                                           ±0.5°C (other range)
    Resolution                                0.1°C / °F
    Start Mode                               Manual / Auto / Temperature start
    Logging Interval                    1 minute...2 hours
    Alarm Ranges                         High and low alarm / 5 alarm ranges
    Battery                                       3.0V CR2450 lithium battery (Replaceable)
    Battery Life                             12 months
    Protection Class                   IP65
    Dimensions                             100mm L x 40mm W x 12mm H
    Weight                                        Approx. 50g
    Technical Spectifications 2

    DisplayLCD
    •OK(√), Alarm(x), alarm zones
    •Running status
    •Bluetooth signal and status
    •Temperature statistics (max, min, avg)
    •Remaining battery level
    •Mark historyButtonStart / Stop / View / Mark
    Connection                         USB
    Bluetooth                             4.0
    Automatic Data File       Encrypted PDF report with embedded raw data
    Software                              TempCentre Data Management Software
                                                      TempSen Go App (IOS & Andriod)
    Compatible OS                  Windows 7 / 8 / 10
    Calibration                           Factory NIST traceable 3-point calibration
    Certifications                     CE,
                                                       FCC,  
                                                        RTCA-DO160G,  
                                                        IATA PI970 II,  
                                                        RoHS, WEEE
    TEMPSEN GO APP (IOS / ANDROID)

    The Bluetooth Tempod data loggers  has a Bluetooth interface in addition to USB.
    With the  TempSen Go app,  your Tempod B datalogger can be configured and read-out.

    Your advantages  :
    • Contactless (re-)configuration before shipping
    • Contactless read-out at the destination
    • Very easy to use, to program whether for your usual operator, whether for occasional operators, and the various stakeholders in the Cold Chain.
    • With a memory capacity of 28,800 measurements and recording intervals available from 1 minute to 2 hours you can program work sessions from 20 days to theoretically 2,400 days.
    • Your Tempod datalogger can be reconfigured as many times as you like.

    Download TempSen Go APP
    You could download and install TempSen Go APP by visiting following links.
    How to configure the data logger.

    1  Connect lo Data  Logger via Bluetooth

    Open TempSen Go  App on your smart device, tap any data logger shown on Device page to connect to this data logger.


    When in Device page, TempSen Go will automatically scan and search all TempSen Bluetooth loggers within communication range (30 meters sight range).
     
    You need to enter correct AccessKey if current data logger was protected with AccessKey with protection level 2.
    You could scan the QR code on front side of logger to connect to this logger directly.


    2 Configuration

    2.1 Configure Device via TempSen Go App   (IOS / ANDROID)
     
    App changes to Device Connected page after successfully connecting to data logger, tap button at bottom bar to enter into Configure Device page, in which you could select and enter
    parameters you need for configuration, and then tap at bottom to apply these configurations to data logger connected.

    Download TempSen Go APP
    You could download and install TempSen Go APP by visiting following links.
    • IOS:   http://itunes.apple.com/app/id1331375457
    • Google Play:   https://play.google.com/store/apps/details?id=com.bdl.coldchain
     
    2.2 Configure Device Online
    Connect Tempod® data logger to PC via USB connection, open online configuration portal www.tempodlogger.com in internet browser, then select the device you are going to configure, input configuration parameters, download configuration profile (.cfg) and save it to the logger created Removable Storage Device "TempSenDisk".

    Configuration profile created contains Local Time Zone information, so please download new configuration profile when you are in different time zone to avoid time error.

    2.3  Configure Device via TempCentre
     
    Connect logger to computer, open TempCentre software, mode to Configure Device mode, enter configuration parameters, and click on Apply to complete configuration.
    Please DO NOT remove logger from PC before you are prompted of configuration success.
     
    Please download TempCentre software from  www.tempsen.com/software/tempcentre


    With the TempSen GO App you wil control the temperature monitoring, read the alarm, download the report, and make a pdf to deal the report with supplier, customer or colleague.

    Report automatically available when Tempod is connected to a usb port.
    Back to content