Humidity Indicator - Senze-Instruments Benelux

Senze-Instruments BENELUX
Go to content
Process & Quality Control

Humidity Indicator

Transportation > Moisture, and Absorber
SORBIS 511 HUMIDITY INDICATORS

The main purpose of the indicators
Assistance in monitoring and fixing the level of flooding in accordance with the requirements of GOST 9.014-78

Applications
SORBIS 511 humidity indicators are used in all industries where humidity control inside the packaging or premises is required.
Particularly in demand is in the defense-industrial complex, as the indicator SORBIS 511 corresponds to GOST 8984-75, is more profitable in terms of cost relative to the use of electronic devices for humidity control and easy to use.

How to act
When the humidity increases, the silicgel indicator contained in the visual Control (CC) section gradually changes color from the original dark blue to pink.
In accordance with GOST 8984-75, the ICI scale determines the level of humidity.

Humidity levels are divided into three types:
  1. Normal: up to 20% relative humidity;
  2. Average: 20 to 35% relative humidity;
  3. High: 35 to 50% relative humidity.

Normal humidity levelHigh humidity
Appearance
SORBIS 511 - The product is made of fabric "Two-nitka severe" and transparent polyethylene sewn among themselves. The product is divided into two compartments. One contains a silica gel indicator GOST 8984-75, the other department contains IKI (Indicator Information Card) with instructions on determining the level of humidity, based on the color of the silica gel indicator. This indicator is placed in a package with a product or in a room where you want to control the level of humidity.
SORBIS 511:
Reusable. To reuse, you need to dry the product in the oven at 100 degrees Celsius, for 6 hours.

- Fixes humidity levels in the range of 20 to 50%.
- Based on the silikagel-indicator GOST 8984-75.
 The color of the silikagel indicator changes from blue to pink depending on the humidity of the silikagel.
- Fabric "Two-nitus harsh" GOST 15530-93
- The original moisture content of the silikagel indicator is no more than 2%
- The mass of silikagel indicator 40g.
- It has a loop in its design for the convenience of fixing the product.
- THE IKI of this indicator is also performed in accordance with GOST 8984-75 and can be performed differently, depending on the tasks facing the customer.



Sorbent:                        silica gel indicator
Package:                       40 g
Moisture content:  <2%
Regeneration conditions: 80–100˚C during 6–7 h

Used for visual control of humidity level in the package.
If silica gel indicator becomes pink, it’s necessary to reduce humidity of the package and regenerate SORBIS 511 or replace it with a new one.
Name                  Weight,    Number of pieces.
                                  gram            In the pack.
Sorbis 511            40                        5
SORBIS 522 HUMIDITY INDICATORS

The main purpose of the indicators
Help in monitoring and fixing the level of flooding in accordance with the requirements of GOST 9.014-78

Applications
SORBIS 522 humidity indicators are used in all industries where humidity control within the packaging or product is required.
Particularly in demand is in the defense-industrial complex, more cost-effective relative to the use of electronic devices for humidity control and easy to use.

How to act
When the humidity increases, the silicgel indicator contained inside the cartridge gradually changes color from the original dark blue to pink (according to GOST 8984-75).

Appearance
The indicator is a cartridge with a thread.
It consists of transparent plastic, peppered with indicator silikagel GOST 8984-75
SORBIS 511:
Reusable. To reuse, you need to dry the product in the oven at 100 degrees Celsius, for 6 hours.

- Fixes humidity levels in the range of 20 to 50%.
- Based on the silikagel-indicator GOST 8984-75.
 The color of the silikagel indicator changes from blue to pink depending on the humidity of the silikagel.
- Fabric "Two-nitus harsh" GOST 15530-93
- The original moisture content of the silikagel indicator is no more than 2%
- The mass of silikagel indicator 40g.
- It has a loop in its design for the convenience of fixing the product.
- THE IKI of this indicator is also performed in accordance with GOST 8984-75 and can be performed differently, depending on the tasks facing the customer.

Regeneration conditions: 80–100˚C during 6–7 h
Used for visual control of humidity level in the package.
If silicagel indicator becomes pink, it’s necessary to reduce humidity of the package and regenerate SORBIS 511 or replace it with a new one.
Name                       Indicator               Weight of the       Weight of the            Number of pieces.
                                           size                     the indicator     indicator silicagel            In the pack.
Sorbis 522          67x25x18mm                16 g                            6.5g                                    5


Back to content